Industrial plants such as Steel Melting furnaces, Landfill gas extraction, Petrochemical refineries & Chemical plants are using flare systems ordinarily. Gas flaring is the process of burning off a volatile gas or excess gas. LEOMI provides flare gas measurement solutions using thermal dispersion or calorimetric flow meter technologies. Continuous monitoring of flare gases is required as subject to straight regulations.
LEOMI thermal mass flow meters for flare gas
LEOMI thermal mass flow meters accurately measure flare gases at an extremely high flow rates up to 4000ºC. As well as in some applications when the operator is willing to trade off lower accuracy, LEOMI gas flow meters can save money versus the expense of other technologies.
Because of the flammable properties of the flare gases, LEOMI Insertion thermal mass flow meters are approved for use in hazardous locations. Additionally, LEOMI thermal mass flow meters have programmable pipe diameters ranging from 15mm to 10000mm that can operate in any positions.
Advantages of LEOMI thermal mass flow meters when measuring Flare gas
- Direct mass flow measurement independent of pressure and temperature
- Low-velocity sensitivity for accurate measurements of flare gas & too low pressures.
- Versatile installation capabilities with highest turn-down ratio (100:1) versus other technologies
- No moving parts of LEOMI gas flow meters can work in dirty or wet gas environments
- Very Low installation cost against competing technologies
- Customized flow sensors & configuration available